Manufacturing steps of cosmetic packaging box design: process
After the printing process, the surface treatment process, including film covering process and polishing process, is required, and their most direct role is to protect the printing surface from abrasion. Cosmetics packaging box design uses other processes, such as film covering, bronzing, silvering, UV, concave-convex, embossing, etc., to increase the high-end and exquisite degree of packaging products. Then there is die-cutting, which is the necessary process before pasting the box. The knife plate is made from the box structure selected before the design of the draft. When die-cutting, the knife plate is installed on the die-cutting machine, and the position and corner line are aligned by a professional die-cutting master. The manufacturing steps of cosmetics packaging box design: paste box The last step is to paste the box. The useless edges and corners have been removed from the printed surface after die-cutting. What needs to be done in the pasting step is to carefully align the line position. If the upper and lower lines are not aligned, and the pasting line exceeds the line of the living position, it is unqualified product. The manufacturer will carry out spot check and test on the products when the box pasting is completed. Only qualified products can be packed and sent to customers for use.
